Cam Follower & Roller Follower

Your Leading Cam Follower & Roller Follower Supplier

SUN AUTOMATION GROUP LIMITED was founded in 1986 and had been focusing on exporting high bearing ever since. We have a stock warehouse and provide a variety of stock bearings. For special and rare ones, we can distribute the goods to the agents in the country of origin of each brand. Cam Follower & Roller Follower, also known as a track follower, is a special type of bearing that is designed to roll on a surface rather than directly facilitate rotational motion. We strive to be a world-class bearing provider.

In mechanical engineering, a cam follower, also known as a track follower, is a specialized type of roller or needle bearing designed to follow cam lobe profiles. Cam followers come in a vast array of different configurations, however, the most defining characteristic is how the cam follower mounts to its mating part; Stud-style cam followers use a stud while the yoke style has a hole through the middle.

The roller follower is a compact and highly rigid bearing system. It contains needle bearings and is used as a guide roller for cam discs and straight motion. Since its outer ring rotates while keeping direct contact with the mating surface, this product is thick-walled and designed to bear an impact load.

Why Choose Us?

Rich Experience

SUN AUTOMATION GROUP LIMITED specializes in delivering professional bearing solutions, leveraging nearly 40 years of experience in bearing support and industrial services to serve its customers effectively.

Production Capacity

Our warehouse has one of the largest inventories. We have an annual output of 5 million sets of bearings. We guarantee direct shipments, timely delivery, and a single source of supply.

Production Market

Our products have been exported to North America, Europe, the Middle East, Brazil, South Africa, and Mexico and were well acknowledged by clients worldwide.

Professional Service

We have a 7*24 hours professional sales consultant team that can respond to your needs as quickly as possible and provide the fastest transportation method to bring you a high-quality and low-cost purchasing experience.

Types of Cam Follower & Roller Follower

NAST12ZZUU Roller Follower
The NAST12ZZUU roller follower is a compact and highly rigid bearing system. It contains needle bearings and is used as a guide roller for cam discs and straight motion.

NUKR160XH Cam Follower Stud Type Track Roller Bearing
NUKR160XH is one of the bolt-type roller bearings that have a bolt that supports the outer ring, making it easy to install and remove. It supports loads while guiding and positioning work. Thread the stud directly into a component or secure it with a nut for through-hole mounting.

MCYR 15 S Cam Follower
A roller bearing is a specialized bearing that follows the contours of a cam to transfer motion and load between machine components. They are known for their durability and reliability in high-stress environments where conventional bearings can fail.

Specifications of Cam Follower & Roller Follower

202311091035245ff6c2a733604db7afefe81a2aae336d.jpg (1042×449)

Features of Cam Follower & Roller Follower

•Small coefficient of friction.
•Excellent rotational performance designed for outer ring revolution.
•High load capacity by design—radial gap is smaller than within the general needle roller bearings, alleviating impact load and increasing lifetime.
•Easy attachment with either hexagon sockets or screw driver slots.
•Multiple shapes and styles are available to fit a variety of applications. Followers are available with a cage or full complement design, shield or sealed versions, and either spherical or cylindrical outer rings.
•Sizes, materials and design options abound; ranging from miniature and standard models to eccentric styles and those with thrust disks. Stainless steel versions resist corrosion and are suitable for clean room applications.

NUKR160XH Cam Follower Stud Type Track Roller Bearing

Materials of Cam Follower & Roller Follower

• Steel - Standard material offering high durability at low cost.

• Stainless Steel - Naturally higher corrosion resistance than steel but slightly less durable.

Installation of Cam Follower & Roller Follower

Correct installation is crucial to avoid stress and wear on cam followers. To make sure your cam follower is set up just right with the load, follow these simple steps:

Line It Up: Position your cam follower so it's straight with the load it needs to handle. This is crucial for smooth operation.

Keep It Clean: Make sure to place the greasing hole—the spot where you add lubrication— away from the load area. This practice ensures the cleanliness of the grease, safeguarding it from contaminants such as dirt or debris that could impede the bearing's load carriage capacity.

Check the Tables: When you're preparing to install your cam follower, refer to the torque tables for the correct amount of tightness. This will help you fasten the cam follower securely without over-tightening, which could cause damage.

Turn It Right: Use the torque wrench to tighten the cam follower to the recommended setting. This ensures it's snug and safe without causing any damage.

Getting the torque settings right when you install the cam follower is extremely important. Always check the maker's torque table to make sure you're not too tight or too loose with the bearing.

Payment Terms

T.T with 30% downpayment, 70%before shipment.

Paypal or West Union also accept.

Packaging and Shipping

Shipping Time: Large quantities are in stock, with shipping time as short as 2 business days.

Packaging Details: We use standard export packaging to ensure safe transportation.

Shipping method: Express, air, sea, railway. From China t0 every corner of the w0rld.

FAQ

Q: What does a cam follower look like?

A: These are two main styles when it comes to the outer rings for cam followers: flat or crowned. Flat outer rings, also called cylindrical outer rings, are exactly as they sound – flat across the width of the OD. Crowned outer rings are beveled on the outer ring/head itself.

Q: What is the lifespan of a cam follower?

A: It's recommended to inspect the cam follower between intervals of 10,000 – 20,000 miles. However, various factors, like driving conditions and vehicle age, can influence this schedule.

Q: Do cam followers wear out?

A: When you need your cam follower to operate reliably over a long lifetime, lubrication and sealing are critical. In harsh industrial environments, threats such as dust and particles can shorten a cam follower's lifetime, and heavy use can wear out the bearing's rolling contact surfaces.

Q: What causes cam follower failure?

A: Cam follower failure is typically caused by a lack of lubrication, contamination from dirt or debris, excessive load or force, improper installation, poor alignment, or the use of inferior or modified components. Addressing these issues through proper lubrication, cleaning, correct installation, and using high-quality parts can help prolong the cam follower's lifespan and prevent failure.

Q: How do you maintain a cam follower?

A: Keeping cam follower bearings well-lubricated is key to reducing friction and stopping them from wearing out. No matter if you opt for grease, oil, or Ester-based lubricants, picking the right one plays a crucial role in ensuring your bearings run smoothly and efficiently.

We're well-known as one of the leading cam follower manufacturers and suppliers in China. If you're going to buy high quality cam follower with competitive price, welcome to get more information from our factory.

110BNR19XTRDFLP4, RE 4010 Bearing, VSI250955-N