Technical specifications of the HCS7015-E-T-P4S-UL bearing:

	Item NO.	HCS7015-E-T-P4S-UL
	Bearing catalog	High speed spindle bearing \| Spindle bearing
	Inner diameter	75 mm
	Outside diameter	115 mm
	Width	20 mm
	Contact angle	25°
	Number of row	Single row
	Sealing type	2RSD - Two seals \| Non contact
	Cage	Laminated fabric cage
	Precision	P4S(Higher than P4)
	Baisc dynamic load rating	24 KN
	Basic static load rating	16.2 KN
	Fatique load limit	1.31 KN
	Limiting speed for grease lubrication	19,000 1/min
	Mass approx.	0.645 kg

Bearing coding analysis:

HCS: ceramic ball bearings with seals;
7: angular contact ball bearing;
15: size series;
E: 25° contact angle;
T: outer ring guided, phenolic reinforced fiber laminated nylon window cage;
P4S: AG standard, P4S level accuracy, higher than DIN620 standard P4;
U: single bearing, universal pairing;
L: light preloading.

Bearing designs, features, and applications:

Spindle bearing with balls made from ceramic

The HCS7015-E-T-P4S-UL FAG original is a high-speed design hybrid spindle bearing. This bearing type has seals on both sides and small ceramic balls. Hybrid spindle bearings can reach high speeds with little heat generation and wear. Even at very high speeds, a high degree of rigidity is maintained. This makes the HCS7015-E-T-P4S-UL FAG particularly suitable for use in high-speed- or grinding spindles.

FAG spindle bearings are single-row, angular contact ball bearings that cannot be dismantled. They have solid inner and outer rings and ball-and-cage assemblies with solid window cages. Due to their extremely tight tolerances, they are particularly suitable for applications that require high guidance accuracy and suitability for high speeds. Spindle bearings are commonly used for main spindles in machine tools.

Shipping method:

Shipping method of the SUN AUTOMATION GROUP LIMITED