Medium-high Torque Shrink Discs are mainly divided into three types: TLK 601, TLK 602 and TLK 603.
Your Leading Medium-high Torque Shrink Discs Supplier
SUN AUTOMATION GROUP LIMITED was founded in 1986 and had been focusing on exporting high bearing ever since. We have a stock warehouse and provide a variety of stock bearings. For special and rare ones, we can distribute the goods to the agents in the country of origin of each brand. Our shrink discs are available in medium-high torque shrink discs and very-high torque shrink discs. By tightening the screws on the disc, the hub is compressed onto the shaft, forming a strong and reliable mechanical bond.
-
TLK603 55X100 Medium-High Torque Shrink Disc
The KTR 603 external clamping set (shrink disk) is a shaft-hollow shaft-connection.This external Add to Inquiry
Features & Benefits
- Medium-high torque
- Available from 14 mm to 490 mm
- Quick installation and dismantling
- Self-centering
Why Choose Us?
Rich Experience
SUN AUTOMATION GROUP LIMITED specializes in delivering professional bearing solutions, leveraging nearly 40 years of experience in bearing support and industrial services to serve its customers effectively.
Production Capacity
Our warehouse has one of the largest inventories. We have an annual output of 5 million sets of bearings. We guarantee direct shipments, timely delivery, and a single source of supply.
Production Market
Our products have been exported to North America, Europe, the Middle East, Brazil, South Africa, and Mexico and were well acknowledged by clients worldwide.
Professional Service
We have a 7*24 hours professional sales consultant team that can respond to your needs as quickly as possible and provide the fastest transportation method to bring you a high-quality and low-cost purchasing experience.
Characteristics of Medium-high Torque Shrink Discs
Light design – Suitable for medium transmissible values when space is limited.
Slit inner ring – Low forces and pressures on hub and shaft.
Maximum reliability – Suitable for static, dynamic and impact loads.
Simplified manufacture – Only plain shaft and bore diameters with easily achieved surface finish and tolerances are required.
Easy replacement – The Shrink Disc is free from any form fit.
Easy mounting – No steps, keyways, splines are required, therefore hubs can be located and locked at any point or angle on the shaft. Shrink Discs use standard screws tightened with standard tools. No additional machining or fitting work is required.
Low susceptibility to contamination – When the locking screws are tightened the functional contact surfaces are pressed firmly together and prevent the ingress of dirt and moisture.
Specifications of Medium-high Torque Shrink Discs
|
Product name |
Medium-high Torque Shrink Discs |
|
Type |
Shrink Discs |
|
Application |
Industrial Equipment |
|
Body Material |
Steel |
|
Size |
Customized Size |
|
Keyword |
Elastic Coupling Parts |
|
Color |
Black |
|
Surface Treatment |
Blackening |
|
Service |
OEM ODM |
|
Usage |
Module |
Surface Treatment Methods for Medium-high Torque Shrink Discs
Phosphating Treatment
Phosphating is a chemical process that creates a protective phosphate coating on metal surfaces. It involves a chemical reaction between the metal workpiece and a phosphate solution, resulting in the formation of a crystalline layer. This layer enhances adhesion and provides excellent corrosion resistance.
Electroless Plating
Electroless Plating, also called chemical plating, traditionally classified as a subset of electroplating, represents a distinctive branch within the realm of electroplating. Its fundamental difference lies in the fact that chemical plating, doesn't rely on an external electrical current and the presence of an anode.
Installation Tips of Medium-high Torque Shrink Discs
Check all parts for dimensional accuracy. The hollow shaft OD should have a tolerance of h8. The maximum clearance between the shaft OD and hollow shaft ID is 0.007 inches (0.2 millimeters).
Wipe the hollow shaft ID and shaft OD. Both must be clean and dry—no grease or oil.
Check the surface finish on the shaft and hollow shaft. The finish should be between 32 and 125 RMS.
Place the support bushing on the hollow shaft. Light oil may be added to the support bushing only to assist with insertion.
Insert the shaft inside the hollow shaft with the support bushing. Make sure the shaft and hollow shaft have the correct tolerance. Light oil may be added to the support bushing only to assist with insertion.
Tighten the support bushing screw to the catalog-recommended torque. Use a calibrated torque wrench.
Place the Shrink Disc onto the hollow shaft OD. You may need to loosen the Shrink Disc screws first. To avoid permanent deformation of the hollow shaft, always maintain the full length of engagement between the shaft, hollow shaft and Shrink Disc.
Note—new Shrink Discs are properly lubricated. If you're reusing your Shrink Disc, first verify there is grease on the screws, under the screw heads and on the mating tapers. Also verify the screw threads have not been stretched.
Insert the clamp bushing between the shaft and hollow shaft. The clamp bushing is not reusable.
Ordering Process
Send Us Inquiry → Receive Our Quotation → Negotiate Details → Confirm the Sample → Sign Contract/Deposit → Mass Production →cargo Ready → Balance/Delivery → Further Cooperation
Payment Terms
T.T with 30% downpayment, 70%before shipment.
Paypal or West Union also accept.
Packaging and Shipping
Shipping Time: Large quantities are in stock, with shipping time as short as 2 business days.
Packaging Details: We use standard export packaging to ensure safe transportation.
Shipping method: Express, air, sea, railway. From China t0 every corner of the w0rld.
FAQ
We're well-known as one of the leading medium-high torque shrink discs manufacturers and suppliers in China. If you're going to buy high quality medium-high torque shrink discs with competitive price, welcome to get more information from our factory.
110 145 15 Bearing, 70 Series Spindle Bearings, Model 110 40 2240 Of Bearing